Triple7 Servo Brass Edition

ReefsRC – Triple7 Brass Edition

Details:

• Direct Power High-Current Servo
• High torque, high speed
• Fully programmable, (Reefs USB Link required for programming)
• Spline: 25T

The biggest advantage of the high-voltage capability is that you can connect your 3S battery directly! The Triple 7 Brass ULTRA Finish Servo is ready to shine as a real eye-catcher in your next project—with its considerable weight exactly where you need it.

Technical Specifications:

• Motor: 4-POLE – Brushless
• Waterproof: IP67, 7-point seals
• Sensor: Magnetic angle sensor
• Voltage: 10 V – 14 V max
• Internal: Steel gears
• Casing: CNC brass casing with ULTRA finish
• Bearing type: 3 ball bearings
• Weight: 160 g (5.65 oz)
• Dimensions (L, W, H): 39.8 x 20 x 41.4 mm
• Spline: 25 teeth

• Torque: 48 kg (666 oz) at 11.1 V / 50.4 kg (700 oz) at 12 V / 56 kg (777 oz) at 12.6 V
• Speed: 0.1 sec at 11.1 V / 0.09 sec at 12 V / 0.08 sec at 12.6 V
• Idle current: 380 mA at 11.1 V / 450 mA at 12 V / 480 mA at 12.6 V
• Load current: 4000 mA at 11.1 V / 4500 mA at 12 V / 4800 mA at 12.6 V

Note:
Maximum input voltage of 14 volts. Use a screw with a maximum size of M3x8 mm for the servo horn. Do not leave the servo connected to the battery when not in use, as this may cause damage to the battery due to over-discharge.